Handy Rebound Clip

Husky Spring sells Leaf Springs, Coil Springs, Add a Leaf Kits, Leveling kits, Suspension Helpers, U-bolts & quality suspension parts supported by our suspension experts.

ABOUT SSL CERTIFICATES

0 ITEM(S) IN YOUR BAG / TOTAL:$0.00

• YEAR, MAKE, MODEL PART LOOKUP

›

HOW TO USE YEAR, MAKE, MODEL CATALOG

• SUSPENSION HELPER KITS

	›	Air Lift Helper Kits
	›	Leaf Helper Kits
	›	Timbren SES Rubber Helper Kits

• COIL SPRINGS

• LEAF SPRINGS

	›	Ford Leaf Spring Lookup by Spring Code
	›	Extra Leaf Kits*
	›	Car Leaf Springs
	›	Chassis Cab Leaf Springs
	›	Commercial Chassis Leaf Springs
	›	Pickup Leaf Springs
	›	SUV Leaf Springs
	›	Van Leaf Springs
	›	Motorhome Leaf Springs
	›	Utility Trailer Springs

• LEAF SPRING HARDWARE

	›	Bushings
	›	Center Bolts for Leaf Springs
	›	Handy Rebound Clips
	›	Spring Bolts, Eye & Shackle
	›	Spring Hangers
	›	Spring Shackles
	›	U-bolts

• SUSPENSION HEIGHT PRODUCTS

	›	Coil Spring Spacer Kit Lifts
	›	Extra Leaf Kits
	›	Lift Block Kits - Rear
	›	Torsion Key Front Lifts

• SWAY BAR KITS

ABOUT SSL CERTIFICATES

Home > LEAF SPRING HARDWARE > Handy Rebound Clips

2 1/2" Wide Handy Rebound Clip (can be used on 60mm wide also)

Part Number HC-11

2 1/2" Wide Handy Rebound Clip (can be used on 60mm wide also)

Email a friend

Review this item

Price

Retail Price: $3.85
Your Savings: $0.38
Your Price: $3.47

Availability:

Out of Stock

Choose Options

Brand

HUSKY BRAND

DAYTON BRAND [+$5.90]

Description

Handy Rebound Clips can be installed without dissasembling the leaf spring. A 3/8" hole partially through the bottom of the lowest leaf to be in the clip must be drilled by using a sharp bit, slow rotation speed, and water coolant. Some leaves may already have a hole in the appropriate location which would make the drilling unnecessary. The nub on the bottom piece of the clip indexes the clip to prevent movement linearly after installation. The slots in the top piece of the clip slip over the legs of the bottom piece of the clip. The two pieces can be held to the leaf surface by a clamp or water pump type pliers during installation. Then the legs should be folded by pounding outward and bent down 180 degrees to secure the clip. The Handy Rebound clip will prevent excessive leaf splay when the suspension is unloaded on rebound and help maintain leaf alignment in the stack.